Carbon Fibre Rods,Tubes, Strips & Glass Fibre Cloth

Glass Fibre Cloth 25g/m² Width 975mm

Length 2m (£15.00)
Length 3m (£22.00)
Length 5m (£35.00)

Glass Fibre Cloth 49g/m² Width 975mm

Length 2m (£15.00)
Length 3m (£22.00)
Length 5m (£35.00)

Glass Fibre Cloth 80g/m² Width 1m x Length 2m (£15.00)

LIGHTWEIGHT (PLAIN WEAVE)

Woven Glass Cloth suitable for heavy duty wing covering

Glass Fibre Cloth 163g/m²

TWILL WEAVE

Suitable for moulding model aircraft fuselages. Resin Consumption 128g/m² Laminate thickness 0.179mm weight 291g/m²

Glass Fibre Cloth 280g/m²

TWILL WEAVE

Highly mouldable fabric, fast, good impregnation.
Resin Consumption 220g/m²
Laminate thickness 0.308mm weight 500g/m²

Glass Fibre Cloth 390g/m²

TWILL WEAVE

Highly mouldable fabric, fast, good impregnation.
Resin Consumption 306g/m²
Laminate thickness 0.429mm weight 696g/m²

Woven Glass Tape (175g/m² ) 4metres

PLAIN WEAVE

Glass reinforcing tape

Ideal for joining model aircraft wings,
laying up boat hulls, moulds etc.

Woven Glass Tape (175g/m² )

PLAIN WEAVE

Glass reinforcing tape

Ideal for joining model aircraft wings,
laying up boat hulls, moulds etc.

Carbon Fibre Tows (12K ) £3.95 for 10metres

Supplied on a roll
Ideal for local reinforcing, Balsa wood, Spars, etc. can be applied with epoxy resin or Cyano.

Carbon Fibre Tows (12K ) £30.00 for 150metres

Supplied on a roll
Ideal for local reinforcing, Balsa wood, Spars, etc. can be applied with epoxy resin or Cyano.

Kevlar Thread £5.75 for 50 metre bobbin

Very strong, ideal for whipping, close loop etc. on model aircraft.

This thread is 5 times stronger than steel thread and does not melt even when heated up to 425⁰C

continuously. Kevlar reacts with UV light which will decrease in strength over time but does not affect its fire/temperature resistance. 50% loss of strength to an estimated 50 to 60 weeks of exposure to UV-rays.

I will supply the reel in a black bag to keep out UV-rays when posting to you.

Carbon Fibre Hose 18mm
4mm to 22mm Diameter
Thickness 0.5mm
Technical Data at 45° braid angle:
Diameter 17.8mm
Width flat 28.0mm
Weight 18.1g/m

Carbon Fibre Hose 35mm
12mm to 40mm Diameter
Thickness 0.39mm
Technical Data at 45° braid angle:
Diameter 34.4mm
Width flat 54.0mm
Weight 27.2g/m

Carbon Fibre Hose 60mm
20mm to 70mm Diameter
Thickness 0.27mm
Technical Data at 45° braid angle:
Diameter 62.4mm
Width flat 98.0mm
Weight 40.7g/m

Peel Ply Plain Weave 100mm (4") Wide x 4mts length (£3.75)

This is used to give an overall rough, bondable upper surface free from release agent film once the resin has cured.

Process procedure: Lay on laminate leave laminate to cure, then remove the Peel Ply.

Glass fibre reinforced self-adhesive tape

For use on EPP model aircraft for covering the model.

Very strong and resilient.

Not suitable for use with resin.

25mm (1") Width £4.50 for a 50 metre roll
50mm (2") Width £7.50 for a 50 metre roll